Logo by Alkaron (anonymous IP: 3.145.68.167,2258) | ||||||||||||||
| ||||||||||||||
Audio (343) Datatype (51) Demo (203) Development (602) Document (24) Driver (97) Emulation (149) Game (1011) Graphics (500) Library (118) Network (234) Office (66) Utility (932) Video (69) Total files: 4399 Full index file Recent index file
Amigans.net OpenAmiga Aminet IntuitionBase
Support the site
|
Installation: Copy swraid.device To DEVS: Usage: Create a file ENVARC:swraid.device.xml using either PrefsObjectEditor or NotePad. An "example" configuration file is provided in the archive. The device supports two types of RAID: - mirror (reads are striped across disks) - stripe (both reads and writes are striped across disks) There is a hardcoded limit of 32 units in a RAID array. "mirror": Next you should create identical (same position, size, device name, etc.) partitions on all harddrives (make sure that AutoMount is disabled). Mount the partitions using: Mounter device=swraid.device unit=<swraid unit> <device name:> F.e.: Mounter device=swraid.device unit=0 RAID0: Now the partitions should be visible on WB and you can do a "Quick Format" on each and one of them. "stripe": If you use striping either use DOSDrivers (MediaToolBox can be used to output these, just remember to multiply BlocksPerTrack by the amount of disks in your RAID), or mount the harddrive first using a dummy mountlist such as the RAID0 that's included in the archive and then either format the disk from WB or use MediaToolBox to setup an RDB on the disk (select "swraid.device" in the devices list). Bugs: This is an ALPHA release that has seen little testing so there may be some. Don't use for important data for now. You have been warned. Changes: 52.2 (1-Nov-2007) - Fixed memory leaks on unit open failure - Implemented AbortIO() same as in diskimage.device/flite.device - RAID preferences program 52.1 (29-10-2007) - First released version |
Copyright © 2004-2024 by Björn Hagström All Rights Reserved |